2023 Case IH Terraflex Auger Head - 3020 Series 30

Call for Price

Call for Price

Key Features

Availability Brochure
Year2023
MakeCase IH
ModelTerraflex Auger Head - 3020 Series 30

Product Features

Description

Case IH flex auger heads allow you to master uneven terrain, limit grain loss, and guarantee even crop feeding.

Features may include:
  • The 3020 header incorporates poly crop dividers that have a simple but very effective design
  • The dividers gently present the most down and tangled crop to the reel and cutterbar while positively following ground terrain
  • Medium length crop divider that is recommended for most crop conditions is standard
  • Rod crop dividers are available
  • PTO shaft(s) transfer shaft driven power to both the auger and knife drives
  • Knife drives are then driven with a heavy duty belt
  • The Auger is driven with a heavy #80 chain
  • Suspension design is the key to proper cutting in soft, muddy or hard field conditions
  • TerraFlex provides a wider range of adjustment options than competitive hydraulic suspension systems
  • Fewer moving parts and reduced friction leads to reliability and responsiveness
  • Integrated grain saver prevents crop from falling off the cutterbar
  • Flexible range of movement using a simple torsion block control
  • Ground Pressure is controlled by a fully adjustable torsion block
  • 6 total inches of travel - 3 inches up and 3 inches down
  • Easily adjusted by manual adjustment screws on the back side of the header
  • Located between the main frame and the support arm
  • Reel positions sensors are located on both reel up/down and fore/aft
  • Short profile allows the shoes to follow constantly changing ground conditions
  • Pressure from the cutterbar is only spread over a small area on the skid shoes, it will prevent the header from “pushing" in soft or muddy conditions
  • Single heavy-duty high capacity wobble box knife drive
  • The knife drive is belt driven from the left side of the head
  • 30 & 35 ft headers have available dual knife drive for use in heavy crop or cutting across rows
  • The 3020 header comes standard with a 3-inch fine cut knife and guard
  • The guard and knife ensure that down and tangled crop is picked up and properly cut
  • The 3 inch knife provides excellent cut quality while promoting high cutting speeds
  • The Case IH 3020 six bat reel positively sweeps the crop, and then gently lifts the crop over the cutterbar to the auger
Terraflex Auger Head - 3020 Series 30
  • Trim Name: 30
  • Generic Type (Primary): Corn And Row Crop Headers
Drivetrain
  • Drive System: Hydraulic
Operational
  • Operating Speed: 147 rpm | Reel drive: 5 to 61 rpm
Dimensions
  • Dimensions: Full Fingered: 30 ft | Reel Diameter: 42 in. (1 067 mm) | Knife: 3 in. (76.2 mm)
  • Cutting Width: 30 ft (9.14 m)
  • Auger Diameter: 26 in. (660 mm)
Weights
  • Weight: 6,362 lb. (2 886 kg)
Additional Features
  • Additional Features: Sickle/Knife Drive: Overserrated “sta-sharp"/ “super sta-sharp" | Sickle/Knife Type: Section to wobble box
  • Construction Material: Pickup Reel (Tines): 6 (plastic or steel)

General

Width 30 ft (9.14 m)
Weight 6,362 lb. (2 886 kg)

Shopping Tools