2023 Case IH Terraflex Auger Head - 3020 Series 20
Call for Price
Key Features
Availability
Brochure
Year2023
MakeCase IH
ModelTerraflex Auger Head - 3020 Series 20
Product Features
Description
Case IH flex auger heads allow you to master uneven terrain, limit grain loss, and guarantee even crop feeding.
Features may include:
- The 3020 header incorporates poly crop dividers that have a simple but very effective design
- The dividers gently present the most down and tangled crop to the reel and cutterbar while positively following ground terrain
- Medium length crop divider that is recommended for most crop conditions is standard
- Rod crop dividers are available
- PTO shaft(s) transfer shaft driven power to both the auger and knife drives
- Knife drives are then driven with a heavy duty belt
- The Auger is driven with a heavy #80 chain
- Suspension design is the key to proper cutting in soft, muddy or hard field conditions
- TerraFlex provides a wider range of adjustment options than competitive hydraulic suspension systems
- Integrated grain saver prevents crop from falling off the cutterbar
- Fewer moving parts and reduced friction leads to reliability and responsiveness
- Flexible range of movement using a simple torsion block control
- 6 total inches of travel - 3 inches up and 3 inches down
- Ground Pressure is controlled by a fully adjustable torsion block
- Easily adjusted by manual adjustment screws on the back side of the header
- Located between the main frame and the support arm
- Reel positions sensors are located on both reel up/down and fore/aft
- Short profile allows the shoes to follow constantly changing ground conditions
- Pressure from the cutterbar is only spread over a small area on the skid shoes, it will prevent the header from “pushing" in soft or muddy conditions
- Single heavy-duty high capacity wobble box knife drive
- The knife drive is belt driven from the left side of the head
- 30 & 35 ft headers have available dual knife drive for use in heavy crop or cutting across rows
- The guard and knife ensure that down and tangled crop is picked up and properly cut
- The 3020 header comes standard with a 3-inch fine cut knife and guard
- The 3 inch knife provides excellent cut quality while promoting high cutting speeds
- The Case IH 3020 six bat reel positively sweeps the crop, and then gently lifts the crop over the cutterbar to the auger
Terraflex Auger Head - 3020 Series 20
- Trim Name: 20
- Generic Type (Primary): Corn And Row Crop Headers
Drivetrain
- Drive System: Hydraulic
Operational
- Operating Speed: 147 rpm | Reel drive: 5 to 61 rpm
Dimensions
- Dimensions: Reel Diameter: 42 in. (1 067 mm) | Knife: 3 in. (76.2 mm)
- Cutting Width: 20 ft (6.1 m)
- Auger Diameter: 26 in. (660 mm)
Weights
- Weight: 4,242 lb. (1 924 kg)
Additional Features
- Additional Features: Sickle/Knife Drive: Overserrated “sta-sharp"/ “super sta-sharp" | Sickle/Knife Type: Section to wobble box
- Construction Material: Pickup Reel (Tines): 6 (plastic or steel)
General
| Width | 20 ft (6.1 m) |
| Weight | 4,242 lb. (1 924 kg) |
