2018 Case IH Steiger 620 Wheeled

Call for Price


Availability
Brochure
Year
2018
Manufacturer
Case IH
Model
Steiger 620 Wheeled

Overview

Description

Steiger 620



The Steiger® 620, with industry leading peak 680 horsepower and a 12.9 L Tier 4 B/Final engine, can handle the largest implements and toughest conditions. Available configurations: HD Wheeled, Quadtrac® and HD Wheeled Scraper.

Quick Specs
  • Engine: 12.9 L Tier 4 B/Final
  • Engine Rated Horsepower: 620
  • Maximum Engine Horsepower: 682
  • PTO Power: 473
Engine Performance
  • Advertised Engine Power, Rated, hp (kW): 620 (462)
  • Maximum Engine Power, hp (kW): 682 (509)
  • Rated Engine Speed, rpm: 2100
  • Power Boost, hp (kW): 62 (46)
  • Fuel Tank capacity, gal (L): 455 (1722)
  • Diesel Exhaust Fluid (DEF) tank capacity, gal (L): 66 (250)
PTO Performance
  • PTO Horsepower, Basic / Optional Transmission, hp (kW): 473 (353)
  • PTO Speeds, rpm: 1000
  • PTO operational Type (Independent; Live; Continuous): Independent
Basic Engine
  • Engine Make: Case IH FPT
  • Engine Model: 12.9 L, Two-Stage Turbo
  • Number of Cylinders: 6
  • Displacement, cu in (L): 787 (12.9)
  • Engine Bore, in (mm): 5.31 (135)
  • Engine Stroke, in (mm): 5.91 (150)
  • Block Design, Replaceable Liners: Wet liners
  • Aspiration, Turbocharged or Naturally Aspirated: Two-Stage Turbocharged, Inter- & Aftercooled
Fuel System
  • Fuel System Description: High Pressure Common Rail
  • Fuel System Control, Electronic or Mechanical: Electronic
  • Fuel Injection to combustion chamber, Direct or Indirect: Direct
Emission and Exhaust Treatment
  • Emission Level, US EPA Tier: Tier 4B / Final
  • Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF): SCR w/ DEF
  • Exhaust Gas Recirculation (EGR): No
  • Cleanup Catalyst (CUC): CUC standard
  • Diesel Oxidation Catalyst (DOC): DOC standard
  • Diesel Particulate Filter (DPF): No
  • Exhaust Pipe, Vertical stack or Horizontal: Vertical stack
Cooling System
  • Fan Drive Type: Hydraulic fan drive
Electrical System
  • System Rating, Volts: 12 V System; 24 V Start
  • Alternator Rating, Amps: 240
Basic Transmission Configuration
  • Manufacturer's Description: PowerDrive
  • Transmission Type: Full powershift
  • Number of Forward / Reverse Speeds: 16F / 2R
  • Maximum Speed Forward, mph (kph): 25 (40)
  • Creeper Range Available: No
  • Shuttle (Forward-Reverse) Available: Yes
Optional Transmission 1
  • Manufacturer's Description: No option
  • Transmission Type: No option
  • Number of Forward / Reverse Speeds: No option
Optional Transmission 2
  • Manufacturer's Description: No option
  • Transmission Type: No option
  • Number of Forward / Reverse Speeds: No option
Wheel Or Track Configuration
  • Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks: 4WD
  • Steering Configuration: Front Steer, Frame Articulated, or Track-type Steer: Frame Articulated
Rear Axle Assembly
  • Final Drive Location and Description: Inboard Compound Planetary
  • Axle Output End, Flange or Bar: Bar
  • Axle Bar Diameter, in (mm): 5.5 (140)
Front Axle
  • Suspended Front Axle Available: No
Brakes
  • Service Brake Type: Wet disc
Hydraulic System
  • Hydraulic System Type: Pressure Flow Compensated
  • Main Hydraulic Pump Type: Single pump std; TwinFlow opt.
  • Implement Pump Flow, gpm (Lpm): 42 (159)
  • Optional Pump Flow, gpm (Lpm): 57 (216); 113 (428)
  • Number of Standard Remote Valves: 4 std; up to 8 total
3-Point Hitch Features
  • 3-Point Hitch Category: Category 4N Quick Coupler
  • Optional Hitch Category: No option
  • Draft Sensing or Lift Control: Three Position, Lift, Hold, Lower
  • Draft Link Ends Telescopic: Quick Coupler
3-Point Hitch Lift Capacity
  • Standard Lift Capacity 24 Inches behind pin, lb (kg): 19,621 (8900)
  • Optional Lift Capacity 24 Inches behind pin, lb (kg): No option
  • Standard Lift Capacity at lift pin, lb (kg): np
  • Optional Lift Capacity at lift pin, lb (kg): No option
Drawbar
  • Drawbar Description: Category 4; Cat 5 opt.
Wheelbase / Trackbase
  • Wheelbase, 2WD, in (mm): No 2WD
  • Wheelbase/Trackbase, MFD/4WD or Track, in (mm): 154 (3912)
Length
  • Length, 2WD, incl. Hitch/Drawbar, in (mm): No 2WD
  • Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm): 300 (7615)
Vertical Dimensions
  • Height to Top of Cab, in (mm): 156 (3963)
  • Height to Top of ROPS raised, in (mm): No open ROPS
Width w/ Tires Or Tracks
  • Overall Width, with standard wheels or tracks, in (mm): 120 (3048) bar axle ends
Weight (w/ Tires Or Tracks)
  • Weight, 2WD w/ROPS, lb (kg): No 2WD
  • Weight, MFD/4WD w/ROPS, lb (kg): No open ROPS
  • Weight, 2WD w/Cab, lb (kg): No 2WD
  • Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg): 50,328 (22828)
  • Weight, Total allowable, w/maximum ballast, lb (kg): 66,000 (29937)
Tire / Track Size
  • Front Tire Size, 2WD: No 2WD
  • Front Tire Size orTrack Width, MFD/4WD or Track: 710/70 R42, R1W Duals
  • Rear Tire Size or Track Width: 710/70 R42, R1W Duals

Specs

Engine

Engine Manufacturer
Case IH FPT
Engine Type
12.9 L, Two-Stage Turbo
Horsepower
620 hp (462 kW)
PTO HP
473 hp (353 kW)
Rated RPM
2100
Bore and Stroke
5.31 in. (135 mm) x 5.91 in. (150 mm)

Specifications

Height
156 in. (3963 mm)
Width
120 in. (3048 mm)
Weight
50,328 lb. (22828 kg)
Tire Size
710/70 R42, R1W Duals

General

Fuel System
High Pressure Common Rail
Fuel Capacity
455 gal. (1722 L)
Transmission
PowerDrive
Brakes
Wet disc
Hydraulics
Pressure Flow Compensated
Drive Type
4WD

Related Products